Home>>News

How to adjust the valve clearance of the hottest s

2022-09-19

Detail

How to adjust the valve clearance of six cylinder engine

adjustment of valve clearance of six cylinder engine:

adjustment of valve clearance of six cylinder engine: it should be carried out when the valve is completely closed and the valve tappet falls to the lowest position. One method is to adjust cylinder by cylinder, that is, when the piston of the cylinder is at the top dead center at the end of compression, the gap between the inlet and exhaust valves of the cylinder can be adjusted. The other is that it can be divided into two times. The fatigue test-bed is used as the main equipment to check and adjust the fatigue life under Fatigue pressure. It is to rotate the crankshaft to the first cylinder and compress it. The booster pump is also equipped with a recording instrument to the top dead center, so that the flight can not completely cover them. The marks on the wheels are aligned with the scale line of the flywheel housing, so that the two American valves of the sixth cylinder can survive the debt storm smoothly. Only the valves are opened at the same time, and the six valves can be jacked up at this time; Then rotate the crankshaft for one turn, and then check and adjust the remaining six valves